Want to know your roof pitch but don’t want to climb up? You’re not alone. Many homeowners need this number for material estimates, insurance claims, or contractor quotes. Here are three safe ways to measure roof pitch from the ground.
What is Roof Pitch?
Roof pitch is the angle or slope of your roof. It’s expressed as rise over run. A 6:12 pitch means the roof rises 6 inches for every 12 inches of horizontal distance.
Common residential pitches range from 4:12 to 12:12. Flat roofs are 2:12 or less. Steep roofs exceed 9:12.
Method 1: The Attic Method (Easiest)
This is the safest and most accurate method. You measure from inside your attic.
What You Need
- 24-inch level
- Tape measure
- Flashlight
Steps
- Go into your attic. Find a spot where you can see the underside of the roof rafters.
- Place your level horizontally against a rafter.
- Make sure the bubble is centered (level is flat).
- Measure 12 inches from where the level touches the rafter.
- At the 12-inch mark, measure straight up to the rafter. That number is your pitch.
Example: If you measure 6 inches up at the 12-inch mark, you have a 6:12 pitch.
Pro Tip
Can’t reach the rafters? Use this same method on the roof trusses. The measurement will be the same.
Method 2: The Gable End Method
Look at the triangular end of your roof (the gable). You can measure the pitch from outside using geometry.
What You Need
- Tape measure
- Calculator
- Clear view of the gable end
Steps
- Measure the width of the gable wall (horizontal distance from corner to corner).
- Divide by 2 to get the “run.”
- Measure the height from the top of the wall to the peak (the “rise”).
- Calculate pitch: Rise ÷ Run × 12 = Pitch
Example:
- Wall width: 24 feet → Run = 12 feet (144 inches)
- Height to peak: 6 feet (72 inches)
- Pitch: 72 ÷ 144 × 12 = 6:12
When This Works Best
- You have a simple gable roof
- The gable end is visible and not covered by siding
- You can measure from the ground or a window
Method 3: The Smartphone App Method
Several apps can measure angles using your phone’s camera.
Recommended Apps
- Pitch Gauge (iOS/Android) - Point at roof edge
- Smart Protractor (Android) - Free, accurate
- Measure by Apple (iOS) - Built-in on iPhones
How to Use
- Stand back from your house. You need a clear view of the roof slope.
- Open the app and select angle or slope measurement.
- Align the reference line with the roof edge.
- Read the angle in degrees or convert to pitch.
Angle to Pitch Conversion
| Degrees | Pitch |
|---|---|
| 18.4° | 4:12 |
| 22.6° | 5:12 |
| 26.6° | 6:12 |
| 30.3° | 7:12 |
| 33.7° | 8:12 |
| 36.9° | 9:12 |
| 39.8° | 10:12 |
| 45.0° | 12:12 |
Accuracy Note
Smartphone apps give estimates. They’re usually within 1-2 degrees. For exact measurements, use Method 1 or 2.
Why Roof Pitch Matters
Knowing your pitch helps with:
- Material estimates - Steeper roofs need more shingles
- Material selection - Some shingles don’t work on low slopes
- Labor costs - Steep roofs cost more to install
- Insurance claims - Adjusters need pitch for damage estimates
- Snow load - Steeper roofs shed snow better
Common Roof Pitch Uses
| Pitch | Common Use |
|---|---|
| 2:12 or less | Flat roofs, commercial buildings |
| 4:12 | Ranch homes, covered porches |
| 6:12 | Standard residential |
| 8:12 | Cape Cod, Colonial styles |
| 12:12+ | A-frames, Tudor, steep aesthetics |
When You Should Hire a Pro
Measure from the ground or attic for most situations. But hire a professional if:
- Your roof has multiple pitches
- You need exact measurements for permits
- The roof has complex dormers or hips
- You’re planning major structural work
Quick Reference
| Method | Accuracy | Difficulty | Safety |
|---|---|---|---|
| Attic | High | Easy | Very Safe |
| Gable End | Medium | Moderate | Safe |
| Smartphone | Low-Medium | Easy | Very Safe |
Use Our Free Calculator
Got your pitch? Now calculate your roofing materials with our free Roofing Calculator. Enter your dimensions and get:
- Total shingles needed
- Underlayment rolls
- Ridge cap bundles
- Complete cost estimate
For roof framing projects, try our Rafter Calculator to get cut angles and lumber lists.
Bottom Line: You don’t need to climb on your roof to measure pitch. The attic method gives the best accuracy. The smartphone method is fastest. Choose based on your situation and safety comfort level.