Fence Post Depth Calculator by Height: How Deep Should Posts Be?
Fencing #fence post depth #post hole #fence installation

Fence Post Depth Calculator by Height: How Deep Should Posts Be?

Calculate the right fence post depth based on fence height. Includes frost line rules, concrete amounts, and soil type adjustments.

TheSiteMath Team December 3, 2025 5 min read

How deep should your fence posts go? Too shallow and they’ll lean. Too deep and you waste time and concrete. This guide gives you the exact depths for any fence height.

The Basic Rule

Post depth = 1/3 of total post length

Or use this simpler rule:

Post depth = Fence height ÷ 3 + 6 inches

Quick Reference

Fence HeightPost DepthTotal Post Length
3 feet18 inches4.5 feet
4 feet22 inches5.8 feet
5 feet26 inches6.8 feet
6 feet30 inches8 feet
7 feet34 inches9.8 feet
8 feet38 inches10.8 feet

Includes 2 inches above ground level

Frost Line Consideration

In cold climates, post depth must exceed frost line depth. Otherwise, frost heave will lift your posts.

Frost Line Depths by Region

RegionFrost DepthMinimum Post Depth
Southern US6-12 inches24 inches
Mid-Atlantic24-36 inches36 inches
Midwest36-48 inches42 inches
Northern US48-72 inches48+ inches

Rule: Post bottom must be 6+ inches below frost line.

Check Your Local Code

Many areas have specific post depth requirements. Check with your building department before digging. Some fence heights require permits.

Soil Type Adjustments

Different soils hold posts differently.

Soil TypeAdjustment
ClayStandard depth
SandyAdd 4-6 inches
RockyMay need shallower + more concrete
Wet/MarshyAdd 6+ inches, use gravel base

Signs of Problem Soil

  • Standing water after rain
  • Visible cracks when dry
  • Soft spots when walking
  • Previous fence post failures

Post Hole Diameter

Width matters too. Standard formula:

Hole diameter = 3× post width

Post SizeHole Diameter
4×4 (3.5” actual)10-12 inches
6×6 (5.5” actual)14-16 inches
Round 4”12 inches
Round 6”18 inches

Concrete per Post

Each post needs concrete to stay stable.

Concrete Amounts

Hole SizeBags (50 lb)Bags (80 lb)
10” × 24”1.51
10” × 30”21.5
12” × 30”32
12” × 36”3.52.5
12” × 42”43

Fast-setting concrete is ideal for fence posts

Concrete vs. Gravel

Use Concrete When:

  • Gate posts (need extra strength)
  • Corner and end posts
  • High wind areas
  • Privacy fence (catches wind)
  • Soil is sandy or loose

Gravel Works For:

  • Interior line posts
  • Low fences under 4 feet
  • Well-draining soil
  • Temporary fencing

Step-by-Step Installation

1. Mark Post Locations

  • Set corner posts first
  • String line between corners
  • Mark intermediate posts (6-8 feet apart)

2. Dig Holes

  • Use post hole digger or auger
  • Go 2-4 inches deeper than needed
  • Add 4 inches of gravel at bottom

3. Set Posts

  • Place post in hole
  • Check plumb (vertical) with level
  • Brace temporarily

4. Add Concrete

  • Pour dry mix around post
  • Add water per bag instructions
  • Or pour pre-mixed wet
  • Slope top away from post

5. Let Cure

  • Wait 24-48 hours before attaching rails
  • Full cure takes 7 days
  • Don’t rush it

Common Mistakes

  1. Too shallow - Posts lean within months
  2. No gravel base - Water pools and rots wood
  3. Posts touch soil - Use concrete or gravel to base
  4. Wrong post size - 4×4 is too light for 6+ foot fences
  5. Skipping corner bracing - Corners take most stress

Post Material Guide

MaterialBest DepthLifespan
Pressure-treated pineStandard15-20 years
CedarStandard15-25 years
RedwoodStandard20-30 years
SteelCan be shallower30+ years
Vinyl (with wood core)Standard20-30 years

Calculator Formula

For any fence, use this formula:

Post Depth = MAX(Fence Height × 0.33 + 6, Frost Line + 6)

Example: 6-foot fence in Ohio (42” frost line)

  • Height formula: 72 × 0.33 + 6 = 30 inches
  • Frost line: 42 + 6 = 48 inches
  • Use the larger: 48 inches

Complete Post Requirements

6-Foot Privacy Fence, 100 Linear Feet:

ItemQuantity
Posts (8 ft)15 posts
Post depth30 inches
Hole diameter12 inches
Concrete bags (80 lb)30 bags

Use Our Free Calculator

Our Fencing Calculator automatically calculates:

  • Post depths for your fence height
  • Number of posts needed
  • Concrete quantities
  • Total material costs

For concrete amounts, try our Concrete Calculator too.

Compare Fence Calculator Tools

Looking for the best fence calculator? See our comparison:


Key Point: Always go deeper than the minimum. A few extra inches costs little but adds years of stability. When in doubt, dig to frost line plus 6 inches.

Topics covered:

fence post depth post hole fence installation post setting fence height